 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| keysight technologies infniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules data sheet
introduction see the true performance of your designs. the 86100d dca-x performs precision measurements on high-speed digital designs from 50 mb/s to more than 80 gb/s on up to 16 channels simultaneously. applications include: optical C transceiver design and manufacturing electrical C asic/fpga/ic design and characterization tdr/tdt/s-parameter C serial bus designs, cables, and pcb characterization 03 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet table of contents overview of infniium dca-x .................................................................. 4 specifcations ......................................................................................... 5 general and mainframe .............................................................. 5 comparing specifcations ........................................................... 5 general specifcations ................................................................ 5 mainframe specifcations ............................................................ 5 computer system and storage ................................................... 7 precision time base operation and integrated precision timebase ................................................................... 8 precision time base (86108 confgurations) ............................... 9 modules selection table ........................................................................ 10 86100 family plug-in module matrix ........................................... 10 modules specifcations .......................................................................... 12 single-mode and multimode optical/electrical ......................... 12 single-mode optical/electrical ................................................... 17 dual electrical ............................................................................. 19 dual/quad electrical ................................................................... 22 tdr system .................................................................................. 22 clock recovery ............................................................................ 23 typical system confgurations .............................................................. 24 software applications ............................................................................ 25 measurements ........................................................................................ 27 ordering information ............................................................................. 31 04 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet overview of the infniium dca-x high-fdelity waveform characterization (yellow: raw trace, blue: de-embedded waveform) scope mode eye/mask mode fast transmitter characterization using eye diagram analysis and automated mask margin measurements tdr/tdt mode accurate time domain refectometry/transmission and s-parameter measurements jitter mode precision jitter, amplitude, and frequency analysis capability these modes are further complimented by the following features that provide additional insight and analysis capability: C de-embedding, embedding, equalizer capability C phase noise/jitter spectrum analysis C phase locked loop (pll) analysis C and more precision measurements, more margin, and more insight the 86100d dca-x oscilloscope combines high analog bandwidth, low jitter, and low noise performance to accurately characterize optical and electrical designs from 50 mb/s to over 80 gb/s. the mainframe provides the foundation for powerful insight and measurement capability, such as de-embedding of cables and fxtures, that improve margins and allow engineers to see the true performance of their designs. the 86100d dca-x can be viewed as four powerful instruments in one: modular the modular system means that the instrument can grow to meet your needs, when you need it. theres no need to purchase capability that you dont need now. the dca-x supports a wide range of modules for testing optical and electrical designs. select modules to get the specifc bandwidth, fltering, and sensitivity you need. the dca-x supports all modules in the dca family and is 100% backwards compatible with the 86100c mainframe. high channel count the dca-x can measure from one to 16 channels simultaneously with no signifcant loss in throughput. create an affordable high- capacity test system by measuring multiple signals in parallel. software the dca-x provides powerful analysis capability that is enabled through licensed software options. examples include 86100d-200 for fast and accurate jitter analysis, 86100d-sim for de-embedding and/or embedding of fxtures and cables, and the n1012a/n1014a/n108xa series test applications. 05 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet general and mainframe specifcations describe warranted performance over the temperature range of +10 to +40 c (unless otherwise noted). the specifcations are applicable for the temperature after the instrument is turned on for one hour, and while self-calibration is valid. many performance parameters are enhanced through frequent, simple user calibrations. characteristics provide useful, non-warranted information about the functions and performance of the instrument. characteristics are printed in italic typeface. product specifcations and descriptions in this document are subject to change without notice. general specifcations temperature operating 10 to +40 c (50 to +104 f) non-operating C40 to +65 c (C40 to +158 f) altitude operating up to 4,600 meters (15,000 feet) power (max) 100/120 vac 50/60/400 hz with typical modules: 150 to 230 va at 25 c 220/240 vac 50/60 hz, 700 w maximum weight mainframe without modules 20.5 kg (43 lbs) typical module 1.2 kg (2.6 lbs) mainframe dimensions (excluding handle) without front connectors and rear feet 221 mm (h) x 426 mm (w) x 530 mm (d) (7 in x 16.76 in x 20.9 in) with front connectors and rear feet 234 mm (h) x 426 mm (w) x 601 mm (d) (9.23 in x 16.76 in x 23.67 in) with front cover and rear feet 234 mm (h) x 426 mm (w) x 612 mm (d) (9.23 in x 16.76 in x 24.1 in) max relative humidity 80% for temperatures up to 31 c decreasing linearly to 50% relative humidity at 40 c supply voltage variation 86100d system can operate with supply voltage fuctuations up to 10% of the nominal voltage mainframe specifications horizontal system (time base) pattern lock scale factor (full scale is ten divisions) minimum 2 ps/div (with 86107a or 86100d-ptb: 500 fs/div) maximum 1 s/div 250 ns/div delays 1 minimum 24 ns 40.1 ns default, 24 ns min maximum 1000 screen diameters or 10 s whichever is smaller 1000 screen diameters or 25.401 s whichever is smaller time interval accuracy 2 1 ps + 1.0% of time reading 3 or 8 ps, whichever is smaller jitter mode operation 4 time interval accuracy - jitter mode operation 1 ps time interval resolution (screen diameter)/(record length) or 62.5 fs, whichever is larger display units bits or time (tdr modeCmeters) vertical system (channels) number of channels 16 (simultaneous acquisition) vertical resolution 54xxx, 83xxx, 86xxx: 14 bit a/d converter (16 or more bits with averaging). n10xx: 16 bit a/d converter full resolution channel adjusts in a 1-2-5-10 sequence for coarse adjustment or fne adjustment resolution from the front panel knob adjustments scale, offset, activate flter, sampler bandwidth, attenuation factor, transducer conversion factors record length legacy ui: 16 to 16 k samples flexdca without pattern lock: 16 to 64 k samples flexdca with pattern lock: 16 up to 32 m samples 5 1. time offset relative to the front panel trigger input on the instrument mainframe. 2. dual marker measurement performed at a temperature within 5 c of horizontal calibration temperature. 3. the maximum delay setting is 100 ns and delta time does not span across (28 + nx4) ns 100 ps delay setting, where n=0,1,2.18. if delta time measurement span exceeds above criteria, time interval accuracy is 8 ps +0.1% of time reading. 4. characteristic performance. test confguration: prbs of length 127 bits, data and clock 10 gb/s. 5. maximum number of samples depends on pattern, number of active channels and available memory. specifcations comparing specifcations when comparing performance attributes between instruments, ensure you compare the same type of parameter. for example, compare warranted specifcations from both instruments, or compare characteristics or typical performance. warranted specifcations include measurement uncertainties and are conservative compared to other types of unwarranted attributes. factory calibration cycle - for optimum performance, the instrument should have a complete verifcation of specifcations once every twelve months. 06 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet mainframe specifcations (continued) option str (standard trigger) option etr (enhanced trigger) trigger modes internal trigger 1 free run free run external direct trigger 2 dc to 100 mhz limited bandwidth 3 dc to 100 mhz dc to 3.2 ghz full bandwidth dc to 3.2 ghz external divided trigger n/a 3 to 13 ghz (15 ghz, 32 ghz with option ptb) patternlock n/a 50 mhz to 13 ghz (50 mhz to 15 ghz) module bay trigger 7 n/a yes, supported jitter characteristic < 1.0 ps rms + 5*10e-5 of delay setting 4 1.2 ps (750 fs option ptb) rms for time delays less than 100 ns 6 1.7 ps (1.2 ps option ptb) rms for time delays less than 100 ns 6 maximum 1.5 ps rms + 5*10e-5 of delay setting 4 1.2 ps (750 fs) (50 mhz to 32 ghz) in ptb mode 8 : 200 fs (2.4 to 4 ghz) 120 fs (4 to 9 ghz) 90 fs (9 to 44 ghz) option ptb n/a trigger sensitivity 200 mv pp (sinusoidal input or 200 ps minimum pulse width) 200 mv pp sinusoidal input: 50 mhz to 13 ghz, (to 32 ghz with option ptb) trigger confguration trigger level adjustment C1 to + 1 v ac coupled edge select positive or negative n/a hysteresis 5 normal or high sensitivity n/a trigger gating gating input levels disable: 0 to 0.6 v, enable: 3.5 to 5 v (ttl compatible) pulse width > 500 ns, period > 1 s gating delay disable: 27 s + trigger period + maximum time displayed enable: 100 ns trigger impedance nominal impedance 50 ? refection < 10% for 100 ps rise time connector type 3.5 mm (male) maximum trigger signal 2 v peak-to-peak 1. the freerun trigger mode internally generates an asynchronous trigger that allows viewing the sampled signal amplitude without an external trigger signal but provides no timing information unless a precision timebase is used in eye/mask mode. freerun is useful in troubleshooting external trigger problems. 2. the sampled input signal timing is recreated by using an externally supplied trigger signal that is synchronous with the sampled signal input. 3. the dc to 100 mhz mode is used to minimize the effect of high frequency signals or noise on a low frequency trigger signal. 4. measured at 2.5 ghz with the triggering level adjusted for optimum trigger. 5. high sensitivity hysteresis mode improves the high frequency trigger sensitivity but is not recommended when using noisy, low frequency signals that may result in false triggers without normal hysteresis enabled. 6. slew rate 2 v/ns. 7. the module bay trigger routes trigger signals from the modules rear panel to the mainframe. 86100d-etr is recommended when using a dca module equipped with a rear-panel trigger circuit. examples include 54754a, 83496x, and 86108a/b modules. if operating these modules in an 86100d with option str, an external cable (such as p/n 5062-6690) must be connected from the modules front panel trigger/clock output to the 86100ds trigger input. 8. in precision timebase (ptb) operation with 750 mv input (500 mv input, 9 to 44 ghz). specifcations (continued) 07 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet computer system and storage computer system and storage cpu intel core i5 3550s cpu at 3.0 ghz mass storage 80 gb internal hard drive (default) or 80 gb removable hard drive (option 090) operating system microsoft windows 7 embedded standard (64 bit) display 1 display area 210.4 mm x 157.8 mm (10.4 inch diagonal color active matrix lcd module incorporating amorphous silicon tfts) entire display resolution 1024 pixels horizontally x 768 pixels vertically waveform colors select from over 16 colors; user may change color assignment of all traces (channels, waveform memory and signal processing functions) persistence modes gray scale, color grade, variable, infnite waveform overlap when two waveforms overlap, a third color distinguishes the overlap area (classic dca-j interface only) connect-the-dots on/off selectable persistence minimum, variable (100 ms to 40 s), infnite graticule on/off grid intensity 0 to 100% dialog boxes opaque or transparent front panel inputs and outputs cal output bnc (female) and test clip, banana plug trigger input 2.92 mm 4 , 50 ?, 2 v pp base max usb 2 three low-power usb 2.0 ports; voltage: 5.00 0.25 v; current: 100 ma each precision timebase input (option ptb only) 2.92 mm 4 , 50 ?, 2 v pp max rear panel inputs and outputs gated trigger input ttl compatible video output vga, full color, 15 pin d-sub (female) 10 gpib 3 fully programmable, complies with ieee 488.2 rs-232 9 pin d-sub (male) lan usb 2 four usb 2.0 ports; voltage: 5.00 0.25 v; current: 500 ma each precision timebase delay path (option ptb only) two female sma connectors, nominal length jumper cable included 1. supports external display. supports multiple display confgurations via windows xp pro display utility. 2. usb keyboard and mouse included with mainframe. 3. the gpib card interface is optional. to include this interface, order 86100d-gpi. 4. mainframe ships with 2.92 mm female-female connector saver (p/n 1250-4105). specifcations (continued) 08 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet precision time base 86100d option ptb or 86107a 86107a option 010 86107a option 020 86107a option 040 86100d-ptb trigger bandwidth 2.0 to 15.0 ghz 2.4 to 25.0 ghz 2.4 to 48.0 ghz 2.4 to 44 ghz typical jitter (rms) using 86100d mainframe 4 2.4 ghz: < 150 fs 2.4 ghz: < 150 fs 2.4 ghz: < 150 fs 2.4 to 4 ghz < 200 fs 10 ghz: < 100 fs 10, 20 ghz: < 100 fs 10, 20, 40 ghz: < 100 fs 4 to 9 ghz < 120 fs 9 to 44 ghz < 90 fs typical jitter (rms) using 86100d mainframe 5 2.4 ghz: < 280 fs 2.4 ghz: < 280 fs 2.4 ghz: < 280 fs 2.4 to 5 ghz < 400 fs 10 ghz: < 200 fs 10, 20 ghz: < 200 fs 10, 20, 40 ghz: < 200 fs 5 to 10 ghz < 300 fs 10 to 44 ghz < 200 fs time base linearity error < 200 fs input signal type synchronous clock 1 input signal level 0.5 to 1.0 vpp 0.2 to 1.5 vpp (typical functional performance) dc offset range 200 mv 2 required trigger signal-to-noise ratio 200: 1 trigger impedance (nominal) 50 ? connector type 3 3.5 mm (male) 3.5 mm (male) 2.92 mm 4 2.4 mm (male) 1. filtering provided for option 010 bands 2.4 to 4.0 ghz and 9.0 to 12.6 ghz, for option 020 9.0 to 12.6 ghz and 18 to 25.0 ghz, for option 40 9.0 to 12.6 ghz, 18.0 to 25.0 ghz, and 39.0 to 48.0 ghz. within the fltered bands, a synchronous clock signal should be provided (clock, sinusoid, bert trigger, etc.). outside these bands, fltering is required to minimize harmonics and sub harmonics and provide a sinusoid to the 86107 input. (not required for 86100d-ptb). 2. for the 86107a with option 020, the keysight 11742a (dc block) is recommended if the dc offset magnitude is greater than 200 mv. 3. ships with female-female connector saver(s). 4. with 86107a module, or 86100d-ptb, and an 861xx, n1045 option loj, or n1055a module (electrical channel). 5. with 86107a module, or 86100d-ptb, and 54xxx, 8348x, and n1045a plug-in modules. 6. if an 86107a module is used in an 86100d frame with option ptb, the internal precision timebase is disabled. precision time base operation and integrated precision timebase measurement performance can be further enhanced by adding precision time base capability to the 86100 mainframe. the precision time base reduces the intrinsic jitter of the scope and is recommended when analyzing high-speed data signals. precision timebase capability is achieved using the 86107a precision timebase plug-in module or integrating the precision timebase system within the 86100d mainframe (86100d option ptb). 86100d-ptb does not consume a mainframe plug-in slot. 6 specifcations (continued) 09 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet precision time base 86108a/b 86108a 86108b-lbw 86108b-hbw typical jitter (clock recovery (cr) and precision timebase (ptb) confguration) < 60 fs < 60 fs < 50 fs maximum jitter (clock recovery and precision timebase confguration) 1 < 90 fs < 90 fs < 70 fs typical jitter (clock recovery without precision timebase active) < 1.25 ps < 1.25 ps < 1.25 ps effective trigger-to-sample delay (cr and ptb confguration, typical) < 200 ps < 200 ps < 200 ps typical jitter (trigger signal applied to precision timebase input) < 60 fs < 60 fs < 60 fs maximum jitter (trigger signal supplied to precision timebase input) 1 < 100 fs < 100 fs < 100 fs precision timebase trigger bandwidth 2 to 13.5 ghz (1 to 17 ghz) 1 to 18 ghz 1 to 18 ghz precision timebase external reference amplitude characteristic 1.0 to 1.6 vpp 1.0 to 1.6 vpp 1.0 to 1.6 vpp precision timebase input signal type 2 sinusoid sinusoid sinusoid precision timebase maximum input level 2 v (16 dbm) 2 v (16 dbm) 2 v (16 dbm) precision timebase maximum dc offset level 200 mv 200 mv 200 mv precision timebase input impedance 50 ? 50 ? 50 ? precision timebase connector type 3 3.5 mm male 3.5 mm male 3.5 mm male timebase resolution (with precision timebase active) 0.5 ps/div 0.5 ps/div 0.5 ps/div timebase resolution (precision timebase disabled) 2 ps/div 2 ps/div 2 ps/div 1. verifed with maximum level input signal (~800 mvpp) 2. the precision timebase performs optimally with a sinusoidal input. non-sinusoidal signals will operate with some degradation in timebase linearity. 3. 86108b-lbw are shipped with a 3.5 mm (female) to 3.5 mm (female) connector saver on the input channels (p/n 5061-5311). the 86108b-hbw is shipped with 2.4 mm female to 2.4 mm female connector savers on the input channels. precision time base (86108 confgurations) the 86108 has an integrated precision timebase within the plug-in module. the 86108a/b can be triggered through clock recovery of the observed signal, through an external reference clock into the precision timebase section, or with the precision timebase operating on the clock signal recovered from the observed signal. the following specifcations indicate the 86100 system timebase specifcations achieved when using the 86108a/b plug-in module. (the 86100 mainframe and the 86108a/b module can also be triggered with a signal into the mainframe. in this confguration, the basic mainframe specifcations are achieved.) if the 86108a/b is placed in a mainframe that has an integrated precision timebase (86100d-ptb), the integrated mainframe precision timebase is disabled. specifcations (continued) 10 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet 1. module has receptacle to supply power for external probe. 2. pick any four rates (155 mb/s to 6.25 gb/s). 3. this module is not compatible with the 86100a and 86100b digital communication analyzer (dca) mainframes. if you would like to upgrade older dcas contact keysight technologies and ask for current trade-in deals. 4. the 86108a/b uses all module slots and includes an internal clock recovery and precision timebase capabilities. 5. 4 optical input ports are switched internally to two optical-to-electrical (o/e) converters. 6. all modules with optical channels can use option irc to enhance the effective operating range. reference receivers can be created at any rate within 50% of the hardware capability. irc also corrects non-ideal (but compliant) hardware performance to yield ideal reference receiver responses. 7. with option irc. requires flexdca using pattern lock, 86100d mainframe with option etr, and signals <= prbs16-1. for more details, see application note techniques for higher accuracy optical measurements (keysight literature number 5990-8812en). 8. requires 86100d mainframe (not compatible with 86100a/b/c). 9. generally represents the power level where an ideal eye diagram will approach 0% mask margin due to noise of the oscilloscope. provides a non-specifed fgure of merit to compare sensitivities of various optical channels. 10. a 15 gb/s flter is provided with option 281 and 282 that closely approximates the response required for 16x fibre channel compliance testing. contact keysight for a special option that verifes compliance of the 86105d-281 and 86115d-282 to the 16x fibre channel reference receiver specifcation. 86105c 6 100 2 1 1 750 to 1650 8.5 20 62.5 C20 7 7 7 7 7 7 7 7 200 1 1 750 to 1650 8.5 20 62.5 C16 7 7 7 300 2 1 1 750 to 1650 8.5 20 62.5 C16 7 86105d 3, 6 1 1 750 to 1650 20 35 62.5 C12 7 7 7 7 7 100 1 1 750 to 1650 20 35 62.5 C12 7 7 7 7 7 7 200 1 1 750 to 1650 20 35 62.5 C12 7 7 7 7 7 7 7 7 7 7 7 7 7 86105d 281 1 1 750 to 1650 34 50 62.5 C7 7 7 7 7 7 7 7 7 10 7 7 7 86115d 3, 6 002 2 0 750 to 1650 20 62.5 C12 7 7 7 7 7 102 2 0 750 to 1650 20 62.5 C12 7 7 7 7 7 7 142 2 0 750 to 1650 20 62.5 C12 7 7 7 7 7 7 7 7 7 7 7 7 7 004 5 4 0 750 to 1650 20 62.5 C11 7 7 7 7 7 104 4 0 750 to 1650 20 62.5 C11 7 7 7 7 7 7 144 4 0 750 to 1650 20 62.5 C11 7 7 7 7 7 7 7 7 7 7 7 7 7 86115d 282 2 0 750 to 1650 34 50 62.5 C7 7 7 7 7 7 7 7 7 10 7 7 7 86116c 3, 6 025 1 1 1300 to 1620 45 80 9 C10 7 7 7 7 7 7 7 7 7 7 7 7 7 86116c 3, 6 041 1 1 1300 to 1620 65 80 9 C5 7 7 7 module option no. of optical channels no. of electrical channels tdr/tdt/s-parameters probe power 1 wavelength range (nm) unfltered optical bandwidth (ghz) electrical bandwidth (ghz) fiber input (m) mask test sensitivity (dbm) 9 155 mb/s 622 mb/s 1063 mb/s 1244/1250 mb/s 2125 mb/s 2488/2500 mb/s 2.666 gb/s 3.125 gb/s 4.25 gb/s 5.00 gb/s 6.25 gb/s 8.50 gb/s 9.953 gb/s 10.3125 gb/s 10.51875 gb/s 10.664 gb/s 10.709 gb/s 11.096 gb/s 11.317 gb/s 14.025 gb/s 25.80 gb/s 27.70 gb/s 28.05 gb/s 39.813 gb/s 41.250 gb/s 43.018 gb/s filtered data rates 86100 family plug-in module matrix the 86100 has a family of plug-in modules designed for a broad range of precision optical, electrical, and tdr/tdt measurements. the 86100d can accommodate up to 4 modules for a total of 16 measurement channels. modules selection table 11 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet 54754a 0 2 18 86108a 3, 4 0 2 32 86108b 3, 4 lbw 0 2 35 hbw 0 2 50 86112a 0 2 20 hbw 0 2 30 86117a 0 2 50 86118a 0 2 70 n1045a 4 02f/02m 0 2 60 n1045a 4 04f/04m 0 4 60 n1055a 4 32f/32m 0 2 35 n1055a 4 34f/34m 0 4 35 n1055a 4 52f/52m 0 2 50 n1055a 4 54f/54m 0 4 50 module option no. of optical channels no. of electrical channels tdr/tdt/s-parameters probe power1 electrical bandwidth (ghz) 1. module has receptacle to supply power for external probe. 2. this module is not compatible with the 86100a and 86100b digital communication analyzer (dca) mainframes. if you would like to upgrade older dcas contact keysight technologies and ask for current trade-in deals. 3. the 86108a/b uses all module slots and includes internal clock recovery and precision timebase capabilities. 4. requires 86100d mainframe (not compatible with 86100a/b/c). 86100 family plug-in module matrix (continued) the 86100 has a family of plug-in modules designed for a broad range of precision optical, electrical, and tdr/tdt measurements. the 86100d can accommodate up to 4 modules for a total of 16 measurement channels. modules selection table (continued) 12 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet single-mode and multimode optical/electrical multiple and single-mode optical/electrical modules 86105c 86105d 86105d option 281 optical channel specifcations optical channel unfltered bandwidth 8.5 ghz (9 ghz) 20 ghz (22 ghz) 34 ghz wavelength range 750 to 1650 nm 750 to 1650 nm 750 to 1650 nm calibrated wavelengths 850 nm/1310 nm/1550 nm 850 nm/1310 nm/1550 nm 850 nm/1310 nm/1550 nm optical sensitivity 1 850 nm: 850 nm: 850 nm: C C 8.5 to 11.3 gb/s, C9 dbm C 15 gb/s, C9 dbm C C 14.025 gb/s, C6 dbm C 25.78 gb/s, C6 dbm C > 4.25 to 11.3 gb/s, C16 dbm C 27.85 to 28.05 gb/s, C5 dbm 1310 nm/1550 nm: 1310 nm/1550 nm: 1310 nm/1550 nm: C C 8.5 to 11.3 gb/s, C12 dbm C 15 gb/s, C8 dbm C C 14.025 gb/s, C9 dbm C 25.78 gb/s, C7 dbm C > 4.25 to 11.3 gb/s, C17 dbm C 27.95 to 28.05 gb/s, C6 dbm 1550 nm: C 15 gb/s, C8 dbm C 25.78 gb/s, C8 dbm C 27.95 to 28.05 gb/s, C7 dbm transition time (10 to 90% calculated from tr = 0.48/bw optical) 56 ps 24 ps 15 ps rms noise characteristic 850 nm: 850 nm: 850 nm: C C C 15 gb/s, 9 w C C C 25.78 gb/s, 17 w C C 27.95 to 28.05 gb/s, 18 w C ohh 1310 nm/1550 nm: 1310/1550 nm: 1310 nm: C C C 25.78 gb/s, 13 w C C C ohh C 1550 nm: C 15 gb/s, 8 w C 25.78 gb/s, 15 w C 27.95 to 28.05 gb/s, 17 w C ohh maximum 850 nm: 850 nm: 850 nm: C C C 15 gb/s, 15 w C C C 25.78 gb/s, 25 w C 27.95 to 28.05 gb/s, 25 w C ohh 1310 nm/1550 nm: 1310/1550 nm: 1310 nm: C C C 15 gb/s, 12 w C C C 25.78 gb/s, 20 w C C 27.95 to 28.05 gb/s, 20 w C ohh 1550 nm: C 15 gb/s, 14 w C 25.78 gb/s, 23 w C 27.95 to 28.05 gb/s, 23 w C ohh 1. generally represents the power level where an ideal eye diagram will approach 0% mask margin due to noise of the oscilloscope. provides a non-specifed fgure of merit to compare sensitivities of various optical channels. 2. options 102 and 104 do not include flters for 14.025 gb/s. options 142 and 144 include flters for 14.025 gb/s and no other rates. modules specifcations 13 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet single-mode and multimode optical/electrical (continued) multiple and single-mode optical/electrical modules 86115d option 002, 102, 142 2 86115d option 004, 104, 144 2 86115d option 282 optical channel specifcations optical channel unfltered bandwidth 20 ghz (22 ghz) 20 ghz (22 ghz) 34 ghz wavelength range 750 to 1650 nm 750 to 1650 nm 750 to 1650 nm calibrated wavelengths 850 nm/1310 nm/1550 nm 850 nm/1310 nm/1550 nm 850 nm/1310 nm/1550 nm optical sensitivity 1 850 nm: 850 nm: 850 nm: C 8.5 to 11.3 gb/s, C9 dbm C 8.5 to 11.3 gb/s, C8 dbm C 15 gb/s, C9 dbm C 14.025 gb/s, C6 dbm C 14.025 gb/s, C5 dbm C 25.78 gb/s, C6 dbm C 27.85 to 28.05 gb/s, C5 dbm 1310 nm/1550 nm: 1310/1550 nm: 1310 nm/1550 nm: C 8.5 to 11.3 gb/s, C12 dbm C 8.5 to 11.3 gb/s, C11 dbm C 15 gb/s, C8 dbm C 14.025 gb/s, C9 dbm C 14.025 gb/s, C8 dbm C 25.78 gb/s, C7 dbm C 27.95 to 28.05 gb/s, C6 dbm 1550 nm: C 15 gb/s, C8 dbm C 25.78 gb/s, C8 dbm C 27.95 to 28.05 gb/s, C7 dbm transition time (10 to 90% calculated from tr = 0.48/bw optical) 24 ps 24 ps 15 ps rms noise characteristic 850 nm: 850 nm: 850 nm: C C C 15 gb/s, 9 w C C C 25.78 gb/s, 17 w C 27.95 to 28.05 gb/s, 18 w C ohh 1310/1550 nm: 1310/1550 nm: 1310 nm: C C C 25.78 gb/s, 13 w C C C ohh 1550 nm: C 15 gb/s, 8 w C 25.78 gb/s, 15 w C 27.95 to 28.05 gb/s, 17 w C ohh maximum 850 nm: 850 nm: 850 nm: C C C 15 gb/s, 15 w C C C 25.78 gb/s, 25 w C 27.95 to 28.05 gb/s, 25 w C ohh 1310/1550 nm: 1310/1550 nm: 1310 nm: C C C 15 gb/s, 12 w C C C 25.78 gb/s, 20 w C 27.95 to 28.05 gb/s, 20 w C ohh 1550 nm: C 15 gb/s, 14 w C 25.78 gb/s, 23 w C 27.95 to 28.05 gb/s, 23 w C ohh 1. generally represents the power level where an ideal eye diagram will approach 0% mask margin due to noise of the oscilloscope. provides a non-specifed fgure of merit to compare sensitivities of various optical channels. 2. options 102 and 104 do not include flters for 14.025 gb/s. options 142 and 144 include flters for 14.025 gb/s and no other rates. modules specifcations (continued) 14 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet single-mode and multimode optical/electrical (continued) multiple and single-mode optical/electrical modules 86105c 86105d 86105d option 281 86115d option 002, 102, 142 2 86115d option 004, 104, 144 2 optical channel specifcations (continued) scale factor (per division) minimum : : 20 w : : maximum : : 500 w : : cw 1 accuracy (single marker, referenced to average power monitor) single-mode: : single-mode: C (8/10 gb/s) C 4% (14 gb/s) C 6% 8qoowhuhg C C C (25.78125 gb/s) C (27.7393 gb/s to 28.05 gb/s) C ohh single-mode: C (8/10 gb/s) C 4% (14 gb/s) C 6% 8qoowhuhg single-mode: C (8/10 gb/s) C 4% (14 gb/s) C 6% 8qoowhuhg multimode: : multimode: : multimode: : multimode: : cw offset range (referenced two divisions from screen bottom) wrq: :q: +1 to C3 mw :q: :q: average power monitor vshflohgrshudwlqjudqjh C30 to 0 dbm C30 to +3 dbm C30 to +3 dbm C30 to +3 dbm C30 to +3 dbm average power monitor accuracy single-mode q: q: q: q: q: rqqhfwru rqqhfwru rqqhfwru rqqhfwru rqqhfwru uncertainty uncertainty uncertainty uncertainty (20 to 30 c) uncertainty multimode (characteristic) q: q: q: q: q: rqqhfwru rqqhfwru rqqhfwru rqqhfwru rqqhfwru uncertainty uncertainty uncertainty uncertainty uncertainty 1. cw refers to an unmodulated optical signal. 2. options 102 and 104 do not include flters for 14.025 gb/s. options 142 and 144 include flters for 14.025 gb/s and no other rates. modules specifcations (continued) 15 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet single-mode and multimode optical/electrical (continued) multiple and single-mode optical/electrical modules 86105c 86105d 86105d option 281 86115d option 002, 102, 142 1 86115d option 004, 104, 144 1 optical channel specifcations (continued) user calibrated accuracy single-mode q: q: q: q: q: 3rzhuphwhu 3rzhuphwhu 3rzhuphwhu 3rzhuphwhu 3rzhuphwhu uncertainty uncertainty uncertainty uncertainty uncertainty < 5 c change < 5 c change multimode (characteristic) q: q: q: q: q: 3rzhuphwhu 3rzhuphwhu 3rzhuphwhu 3rzhuphwhu 3rzhuphwhu uncertainty uncertainty uncertainty uncertainty uncertainty < 5 c change maximum input power maximum non-destruct average 0.5 mw (C3 dbm) 5 mw (7 dbm) 5 mw (+7 dbm) 1310/1550 nm 5 mw (7 dbm) 5 mw (7 dbm) single mode: 6 mw (+8 dbm) 850 nm multimode: 3 mw (+5 dbm) maximum non-destruct peak 5 mw (+7 dbm) 10 mw (10 dbm) 10 mw (+10 dbm) 10 mw (10 dbm) 10 mw (10 dbm) fiber input p p 62.5/125 m p p user-selectable user-selectable user-selectable connector connector connector polarization dependent loss at 1550 nm 0.2 db (characteristic) input return loss (hms-10 connector iooooohgoehu 850 nm > 13 db 27 db single-mode > 24 db (1550 nm single mode) 27 db single-mode 27 db single-mode 1310 nm/1550 nm 14 db multimode > 24 db (1310 nm single mode) 14 db multimode 14 db multimode > 24 db > 13 db (850 nm multimode) 1. options 102 and 104 do not include flters for 14.025 gb/s. options 142 and 144 include flters for 14.025 gb/s and no other rates. modules specifcations (continued) 16 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet single-mode and multimode optical/electrical (continued) multiple and single-mode optical/electrical modules 86105c 86105d 86105d option 281 86115d option 002, 102, 142 1 86115d option 004, 104, 144 1 electrical channel specifcations electrical channel bandwidth 12.4 and 20 ghz 25 and 35 ghz 25 and 35 ghz transition time (10 to 90% calculated from tr = 0.35/bw) 28.2 ps (12.4 ghz) 14 ps (25 ghz) 12 ps (25 ghz) 17.5 ps (20 ghz) 10 ps (35 ghz) 7 ps (50 ghz) rms noise characteristic 0.25 mv (12.4 ghz) 0.25 mv (25 ghz) 0.25 mv (25 ghz) 0.5 mv (20 ghz) 0.5 mv (35 ghz) 0.6 mv (50 ghz) maximum 0.5 mv (12.4 ghz) 0.5 mv (25 ghz) 0.5 mv (25 ghz) 1 mv (20 ghz) 1 mv (35 ghz) 1 mv (50 ghz) scale factor (per division) minimum 1 mv/division maximum 100 mv/division dc accuracy (single marker) riioovfdohp9riuhdglqjfkdqqhoriivhw*+ riioovfdohp9riuhdglqjfkdqqhoriivhw*+ dc offset range (referenced to center of screen) p9 input dynamic range (relative to channel offset) p9 maximum input signal 9g%p nominal impedance 5hphfwlrqvirusvulvhwlph 5% electrical input 3.5 mm (male) 2.4 mm (male) 1. options 102 and 104 do not include flters for 14.025 gb/s. options 142 and 144 include flters for 14.025 gb/s and no other rates. modules specifcations (continued) 17 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet single-mode optical/electrical high bandwidth single-mode optical/electrical modules 86116c option 025 86116c option 041 optical channel specifcations optical channel unfltered bandwidth 45 ghz 65 ghz wavelength range 1300 to 1620 nm 3 calibrated wavelengths 1300 nm/1550 nm optical sensitivity 2 1310 nm C9 dbm (17 gb/s) C3 dbm (39.8/43.0 gb/s) C8 dbm (25.8 gb/s) C7 dbm (27.7 gb/s) 1550 nm C10 dbm (17 gb/s) C5 dbm (39.8/43.0 gb/s) C9 dbm (25.8 gb/s) C8 dbm (27.7 gb/s) transition time (10 to 90% calculated from tr = 0.48/bw optical) 7.4 ps (fwhm) 1 rms noise characteristic 1310 nm :*ev :*ev :*ev :*+ :*ev :*+ :*+ :*+ 1550 nm :*ev :*ev :*ev :*+ :*ev :*+ :*+ :*+ maximum 1310 nm :*ev :*ev :*ev :*+ :*ev :*+ :*+ :*+ 1550 nm :*ev :*ev :*ev :*+ :*ev :*+ :*+ :*+ 1. fwhm (full width half max) as measured from optical pulse with 700 fs fwhm, 5 mhz repetition rate and 10 mw peak power. 2. generally represents the power level where an ideal eye diagram will approach 0% mask margin due to noise of the oscilloscope. provides a non-specifed fgure of merit to compare sensitivities of various optical channels. 3. contact keysight for broader wavelength specifcations. modules specifcations (continued) 18 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet single-mode and multimode optical/electrical high bandwidth single-mode optical/electrical modules 86116c optical channel specifcations (continued) scale factor minimum :glylvlrq maximum 5 mw/division cw 1 accuracy (single marker, reference to average power monitor) :uhdglqjfkdqqhoriivhw cw offset range (referenced two divisions from screen button) +8 to C12mw yhudjhsrzhuprqlwruvshflohgrshudwlqjudqjh C23 to +9 dbm factory calibrated accuracy q:frqqhfwruqfhuwdlqwwr user calibrated accuracy q:srzhuphwhuqfhuwdlqwfkdqjh maximum input power maximum non-destruct average 10 mw (+10 dbm) maximum non-destruct peak 50 mw (+17 dbm) fiber input pvhuvhohfwdeohfrqqhfwru ,qswuhwuqorvv+06frqqhfwruiooooohgoehu 20 db electrical channel specifcations electrical channel bandwidth 80 (93), 55 and 30 ghz transition time (10 to 90% calculated from tr = 0.35/bw) 6.4 ps (55 ghz) 4.4 ps (80 ghz) rms noise characteristic 0.5 mv (30 ghz) 0.6 mv (55 ghz) 1.1 mv (80 ghz) maximum 0.8 mv (30 ghz) 1.1 mv (55 ghz) 2.2 mv (80 ghz) scale factor (per division) minimum 2 mv/division maximum 100 mv/division dc accuracy (single marker) riioovfdoh p9riuhdglqjfkdqqhoriivhw ririivhwdooedqgzlgwkv dc offset range (referenced to center of screen) p9 input dynamic range (relative to channel offset) p9 maximum input signal 9g%p nominal impedance 5hphfwlrqvirusvulvhwlph 10% (dc to 70 ghz) 20% (70 to 100 ghz) electrical input 1.85 mm (male) 1. cw refers to an unmodulated optical signal. modules specifcations (continued) 19 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet dual electrical dual electrical channel modules 86112a 54754a electrical channel bandwidth 12.4 and 20 ghz (30 ghz 1 ) 12.4 and 18 ghz transition time (10 to 90% calculated from tr = 0.35/bw) 28.2 ps (12.4 ghz) 28.2 ps (12.4 ghz) 17.5 ps (20 ghz) 19.4 ps (18 ghz) rms noise characteristic 0.25 mv (12.4 ghz) 0.25 mv (12.4 ghz) 0.5 mv (20 ghz) 0.5 mv (18 ghz) maximum 0.5 mv (12.4 ghz) 0.5 mv (12.4 ghz) 1 mv (20 ghz) 1 mv (18 ghz) scale factor (per division) minimum 1 mv/division maximum 100 mv/division dc accuracy (single marker) 0.4% of full scale 0.4% of full scale 2 mv 1.5% of (reading-channel offset) 2 mv 0.6% of (reading-channel offset) (12.4 ghz) 0.4% of full scale (12.4 ghz) 0.4% of full scale or marker reading (whichever is greater) 2 mv 3% of (reading-channel offset) (20 ghz) 2 mv 1.2% of (reading-channel offset) (18 ghz) dc offset range (referenced from center of screen) 500 mv input dynamic range (relative to channel offset) 400 mv maximum input signal 2 v (+16 dbm) nominal impedance 50 ? refections (for 30 ps rise time) 5% electrical input 3.5 mm (male) dual electrical channel modules 86117a 86118a electrical channel bandwidth 30 and 50 ghz 50 and 70 ghz transition time (10 to 90% calculated from tr = 0.35/bw) 11.7 ps (30 ghz) 7 ps (50 ghz) rms noise characteristic 0.4 mv (30 ghz) 0.7 mv (50 ghz) 0.6 mv (50 ghz) 1.3 mv (70 ghz) maximum 0.7 mv (30 ghz) 1.8 mv (50 ghz) 1.0 mv (50 ghz) 2.5 mv (70 ghz) scale factor (per division) minimum 1 mv/division maximum 100 mv/division dc accuracy (single marker) 0.4% of full scale 0.4% of full scale 2 mv 1.2% of (reading-channel offset), (30 ghz) 2 mv 2% of (reading-channel offset), (50 ghz) 0.4% of full scale 0.4% of full scale 2 mv 2% of (reading-channel offset), (50 ghz) 2 mv 4% of (reading-channel offset), (70 ghz) dc offset range (referenced from center of screen) 500 mv input dynamic range (relative to channel offset) 400 mv maximum input signal 2 v (+16 dbm) nominal impedance 50 ? refections (for 30 ps rise time) 5% 20% electrical input 2.4 mm (male) 1.85 mm (male) 1. a special option, 86112-hbw, extends the bandwidth from 20 to 30 ghz. all other specifcations remain unchanged. modules specifcations (continued) 20 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet dual electrical (continued) dual electrical channel modules 86108a 86108b-lbw 86108b-hbw bandwidth (low/high bw setting) 16 and > 32 ghz, (35 ghz) 20 and 35 ghz 35 and 50 ghz transition time (10 to 90% calculated from tr = 0.35/bw) 10 ps 10 ps 7ps rms noise characteristic (low/high bw setting) 240 v/420 v 300 v/500 v 600 v/750 v maximum (low/high bw setting) 350 v/700 v 350 v/700 v 800 v/980 v scale factor (per division) minimum 2 mv/division 1 mv/division 1 mv/division maximum 100 mv/division 140 mv/division 140 mv/division dc accuracy (single marker) low bw setting 0.7% of full scale, 2 mv 1.5% of (reading-channel offset) (16 ghz) high bw setting 0.7% of full scale, 2 mv 3% of (reading-channel offset) (32 ghz) cw offset range (referenced from center of screen) 500 mv 700 mv 700 mv input dynamic range (relative to channel offset) 400 mv 560 mv 560 mv maximum input signal 2 v (+16 dbm) 2.5 v (+18 dbm) 2.5 v (+18 dbm) nominal impedance 50 ? 50 ? 50 ? refections (for 30 ps rise time) 5% 5% 5% electrical input 3.5 mm 3.5 mm 2.4 mm ch1 to ch2 skew < 12 ps < 10 ps < 10 ps modules specifcations (continued) 21 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet dual electrical (continued) clock recovery 86108a 86108b-216 86108b-232 data rate input range (continuous tuning) 0.05 to 14.2 gb/s (requires fw revision 8.1 or higher) 0.05 to 16 gb/s 0.05 to 32 gb/s clock frequency input range (continuous tuning) 0.025 to 6.75 ghz 0.025 to 8 ghz 0.025 to 16 ghz minimum input level to aquire lock 175 mv pp 175 mv pp 175 mv pp recovered clock random jitter (used as internal trigger) 1 internal recovered clock trigger < 500 fs at 2 gb/s < 350 fs at data rate < 2 gb/s < 350 fs at data rate < 2 gb/s < 400 fs at 5 and 10 gb/s < 300 fs at data rate 2 gb/s < 300 fs at data rate 2 gb/s clock recovery adjustable loop bandwidth range (user selectable) 0.015 to 10 mhz 0.015 to 20 mhz 0.015 to 20 mhz clock recovery loop peaking range up to 4 settings (dependent on loop bw) loop bandwidth accuracy 30% tracking range (includes spread spectrum tracking) 2500 ppm 0.25% aquisition range 5000 ppm maximum consecutive identical digits to lock 150 auto relocking if signal lock is lost, system can automatically attempt to regain phase-lock. user selectable to enable/disable residual spread spectrum C72 3 db at 33 khz C84 3 db at 33 khz C84 3 db at 33 khz front panel recovered clock amplitude 0.15 to 1.0 vpp (0.3 to 1.0 vpp) front panel recovered clock divide ratio (user selectable) 1, 2, 4, 8, 16 1, 2, 4, 8, 16 1, 2, 4, 8, 16 2, 4, 8, 16 2, 4, 8, 16 2, 4, 8, 16 recovered clock front panel connector type sma internal frequency counter accuracy 10 ppm 1. these values indicate performance with the internal precision timebase disabled. with precision timebase enabled, system jitter performance is dramatically decreased. see page 9. phase trimmers 86108b-pt3 (= qty 2 n1027a-pt3) 86108b-pt2 (= qty 2 n1027a-pt2) nominal impedance 50 ? 50 ? frequency range dc to 26 ghz dc to 50 ghz insertion loss (at f max) 0.8 db 0.8 db time delay 238 to 293 ps 172 to 195 ps connectors sma (m-f) 2.4 mm (m-f) modules specifcations (continued) 22 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet dual/quad electrical dual/quad electrical channel modules n1045a 1 n1055a 1 channel options (number of channels; f = female; m = male) 02f/02m 04f/04m 32f/32m 34f/34m 52f/52m 54f/54m number of channels 2 2 4 2 4 2 4 electrical channel bandwidth 20/35/45/60 ghz 35 ghz 4, 5 35 ghz 4, 5 35/50 ghz 5 35/50 ghz 5 transition time (characteristic) (10 to 90% calculated from tr = 0.35/bw) 17.5/10/7.8/5.8 ps 10 ps 10 /7 ps channel-to-channel skew range 100 ps 150 ps rms noise characteristic 275/425/500/750 v 600 uv 600/750 uv maximum 950 v (60 ghz) 730 uv 950 uv scale factor (per division) minimum 1 mv/division 1 mv/division maximum 100 mv/division 100 mv/division dc accuracy (single marker) 2 mv 4% of (reading-channel offset), (60 ghz) 2 mv 4% of (reading-channel offset), (50 ghz) dc offset range (referenced from center of screen) 500 mv 500 mv input dynamic range (relative to channel offset) 400 mv 400 mv maximum input signal 2 v (+16 dbm) +2 v/C1 v nominal impedance 50 ? 50 ? refections (for 30 ps rise time) 20% 20% electrical input 3 1.85 mm (female or male option) 2.92 mm (female or male option) 1.85 mm (female or male option) tdr system tdr system (mainframe with 54754a module) oscilloscope/tdr performance normalized characteristics rise time 40 ps nominal adjustable from larger of 17 ps or 0.08 x time/div < 25 ps normalized maximum: 5 x time/div tdr step fatness 1% after 1 ns from edge 0.1% 5%, C3% < 1 ns from edge low level 0.00 v 2 mv high level 200 mv +2 mv tdr system (mainframe with n1055a module) n1055a - 3xx (35 ghz bandwidth) n1055a - 5xx (50 ghz bandwidth) without tdr calibration with tdr calibration without tdr calibration with tdr calibration step rise/fall time (transmitted 6 ) < 18 ps adjustable from 15 ps, characteristic < 7 ps adjustable from 6 ps, characteristic 1. module is supported by 86100d dca-x mainframe and later. 2. upgradable from two channel to four channel after purchase (return to keysight). 3. connector style is the same on all channels and is selected at time of order. 4. upgradable from 35 to 50 ghz after purchase (return to keysight). 5. tuned to be C3 db ( measurement uncertainty) at stated bandwidth(s) using nist traceable swept-sine test system. 6. defned as the transition time at the output of the remote head. it is calculated by deconvolving the receiver transition time from the measured transition time when the remote head is terminated with a short. measured on a negative tdr step. modules specifcations (continued) 23 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet clock recovery modules 83496b-100 83496b-101 channel type differential or single-ended electrical single-mode or multimode optical, differential or single-ended electrical (no internal electrical splitters) data rates (divide by 2 for clock signals) standard: 50 mb/s to 7.1 gb/s continuous tuning option 200: 50 mb/s to 14.2 gb/s continuous tuning option 201: 7.1 to 14.2 gb/s continuous tuning for rates above 14 gb/s, the n1076a and n1077a operate from 50 mb/s to 32 gb/s minimum input level to acquire lock (voltage or oma 1 ) 150 m vpp single-mode (oma 1 ): C11 dbm to 50 mb/s to 11.4 gb/s C8 dbm to > 11.4 gb/s C12 dbm to 7.1 to 14.2 gb/s (with option 200) C14 dbm to 1 to 7.1 gb/s C15 dbm to 50 mb/s to 1 gb/s multimode 1310 nm (oma 1 ): C10 dbm to 50 mb/s to 11.4 gb/s C7 dbm to > 11.4 gb/s C11 dbm to 7.1 to 14.2 gb/s (with option 200) C13 dbm to 1 to 7.1 gb/s C14 dbm to 50 mb/s to 1 gb/s multimode 850 nm (oma 1 ): C8 dbm to 50 mb/s to 11.4 gb/s C7 dbm to > 11.4 gb/s C9 dbm to 7.1 to 14.2 gb/s (with option 200) C11 dbm to 1 to 7.1 gb/s C12 dbm to 50 mb/s to 1 gb/s electrical: 150 m vpp output random jitter (rms) 2 internal recovered clock trigger: < 500 fs 7.2 to 11.4 gb/s (300 fs to 10 gb/s) < 700 fs 4.2 to 7.2 gb/s, 11.4 gb/s to 14.2 gb/s (400 fs to 4.25 gb/s, 500 fs to 2.5 gb/s) < 3 mui 50 mb/s to 4.2 gb/s (700 fs to 1.25 gb/s) front panel recovered clock: < 700 fs 7.2 to 11.4 gb/s (300 fs to 10 gb/s) < 900 fs 4.2 to 7.2 gb/s, 11.4 to 14.2 gb/s (400 fs to 4.25 gb/s, 500 fs to 2.5 gb/s) < 4 mui 50 mb/s to 4.2 gb/s (700 fs to 1.25 gb/s) clock recovery adjustable loop bandwidth range (user selectable) standard: 270 khz or 1.5 mhz 3 option 300: 15 khz to 10 mhz 4 continuous tuning (fxed value or a constant rate/n ratio) loop bandwidth accuracy standard: 30% option 300: 25% for transition density = 0.5 and data rate 155 mb/s to 11.4 gb/s ( 30% for 0.25 transition density 1.0 and all data rates) tracking range 2500 ppm, 83496b 1000 ppm, 83496a aquisition range 5000 ppm internal splitter ratio 50/50 50/50 single-mode 30/70 multimode electrical signals have input only (no internal power dividers) input return loss 22 db (dc to 12 ghz) electrical 20 db single-mode, 16 db multimode 16 db (12 to 20 ghz) electrical 22 db min (dc to 12 ghz) electrical 16 db min (12 to 20 ghz) electrical input insertion loss 7.2 db max (dc to 12 ghz) electrical 4 db max single-mode optical 7.8 db max (12 to 20 ghz) electrical 4 db max multimode optical (no electrical data output signal path) see footnotes on next page. modules specifcations (continued) clock recovery the dca platform offers clock recovery capability in the form of dca plug-in modules such as the 83496b or standalone clock recovery solutions such as the n1076a/n1077a. specifcations for 83496b modules are summarized below. for more information on standalone clock recovery solutions, please download the n1076a/n1077a data sheet from www.keysight.com/fnd/n1077a . 24 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet clock recovery (continued) clock recovery modules (continued) 83496b-100 83496b-101 electrical through-path digital amplitude attenuation 5 7.5 db no electrical data output signal path wavelength range 830 to 860 nm and 1260 to 1360 nm multimode 1260 to 1360 nm and 1490 to 1600 nm single mode electrical: 150 m vpp front panel recovered clock output amplitude 1 vpp max, 220 mvpp min, 300 mvpp consecutive identical digits (cid) 150 max front panel recovered clock output divide ratio (user selectable) 6 n=1 to 16 at data rates 50 mb/s to 7.1 gb/s n=2 to 16 at data rates 7.1 to 14.2 gb/s data input/output connectors 3.5 mm male fc/pc7 9/125 m single-mode optical fc/pc7 62.5/125 m multimode optical 3.5 mm male electrical (input only) front panel recovered clock output connector sma 1. to convert from oma to average power with an extinction ratio of 8.2 db use: pavgdbm = omadbm C1.68 db. 2. verifed with prbs7 pattern, electrical inputs > 150 mvp-p and optical inputs > 3 db above specifcation for minimum input level to acquire lock. output jitter verifcation results of the 83496b can be affected by jitter on the input test signal. the 83496b will track jitter frequencies inside the loop bandwidth, and the jitter will appear on the recovered clock output. vertical noise (such as laser rin) on the input signal will be converted to jitter by the limit amplifer stage on the input of the clock recovery. these effects can be reduced by lowering the loop bandwidth setting. 3. at rates below 1 gb/s, loop bandwidth is fxed at 30 khz when option 300 is not installed. 4. without option 200 loop bandwidth is adjustable from 15 khz to 6 mhz. available loop bandwidth settings also depend on the data rate of the input signal. for transition density from 0.25 to 1, the loop bandwidth vs rate chart shows available loop bandwidth settings. higher loop bandwidths can be achieved when average data transition density is maintained at or above 50%. 5. 20*log(vampout/vampin) measured with prbs23 at 14.2 gb/s. 6. minimum frequency of divided front panel clock output is 25 mhz. 7. other types of optical connectors are also available. selectable loop bandwidth vs rate for 0.25 tr ansition density 1 10.0e+3 100.0e+3 1.0e+6 10.0e+6 10.0e+6 100.0e+6 1.0e+9 10.0e+9 100.0e+9 input data rate (bits/s ) loop bandwidth (hz) min max typical system confgurations 1. contact your local keysight sales representative to help confgure a system for your specifc application. modules specifcations (continued) dc a plug-in modules (for typical 1 applications) t rigger options (select one only): str ? standar d ? for basic ey e measur ements onl y etr ? enhanced ? for pattern wav eforms, jitter analysis and some tdr applications ptb ? integrated pr ecision timebase for low r esidual jitte r remote connection options (select one only): gpi ? gpib car d interface installed gpn ? no gpib car d 86100d har dwar e options 061/062 ? add matlab analysis package 200 ? enhanced jitter analysis 201 ? advanced wav eform analysis 202 ? enhanced impedance and s-parameters 300 ? advanced amplitude analysis/rin/q-scale 500 ? pr oductivit y package sim ? infiniisim-dca de-embedding/embedding 86100du ? 400 pll and jitter spectrum analysis 86100d ? 401 advanced ey e analysis (jitter on prbs31 ) 86100d softwar e options (select any) : 86100d infiniium dca-x mainfr ame optical 20, 40 gb/s 86105d-281 34 ghz optical channel (780 to 1630 nm) 86116c 65 ghz optical channel 80 ghz electrical channel 86107a (#40) or 86100d-ptb precision timebase optical 1 to 12gb/s 86105c 9 ghz optical channel 20 ghz electrical channel electrical/pll 1 to 12 gb/s 86112a dual channels bw > 20 ghz each 83496b electrical clock recovery (#100, 200, 300) electrical/pll 1 to 16/32 gb/s (high performance) 86108b dual channels bw > 35/50 ghz with integrated precision timebase & clock recovery electrical 20, 40 gb/s (high performance) 86118a dual remote heads bw > 70 ghz each 86107a or 86100d-ptb precision timebase (#40) tdr/tdt single-ended, differential 54754a dual 18 ghz channels n1055a 2 or 4 channels 35 or 50 ghz channels note - tdr/tdt modules also perform as electrical-only receivers 25 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet low cost manufacturing solutions get 86100 dca accuracy with a test solution designed specifcally for manufacturing. the keysight 86100 dca family is recognized as the industry standard for verifying optical transmitter compliance to communications standards. for years engineers have trusted the dca for easy and accurate measurement of their digital communications waveforms. the new n1090a/b/c and n1092a/b/d build on that legacy by using the high-performance elements of both the 86100 oscilloscope mainframe acquisition system and the optical channels. designed specifcally for high-volume manufacturing test applications, the n109x provides the measurement accuracy of the 86100 but without the extra cost associated with an r&d test solution. the n109x is a complete measurement system in a compact low-cost form factor. the n1090a is used for testing optical signals from 1 to 11 gb/s. the n1092a/b/d are used for testing optical signals from 20 to 28 gb/s. be confdent that your test results will never be questioned when performed with the n109x as end users of your transceivers are likely to use similar accurate, high-quality test systems to verify component performance. the n109x is intended to operate as a standalone system, but can also be operated as an extended 86100d module connected by usb to a dca-x mainframe. software applications 86100d-200 enhanced jitter analysis option 200 provides extensive and accurate jitter decomposition, which is increasingly important as data rates increase and margins reduce. quickly customize your view of many parameters and take advantage of advanced features such as jitter spectrum analysis. 86100d-201 advanced waveform analysis take advantage of powerful features in option 201 to generate much deeper waveform fles, integrate matlab analysis, and use the built-in linear feed-forward equalizer. 86100d-202 enhanced impedance and s-parameter option 202 works in tdr mode and provides live s-parameter responses, including magnitude (return loss, insertion loss, etc.), phase and group delay. single-ended, differential and mixed- mode responses are available simultaneously. also enables quick and easy saving of measurement results in touchstone fles (.s2p, .s4p, etc.). 86100d-300 amplitude analysis/rin/q-factor extend the many capabilities from jitter mode into the amplitude domain and see the decomposition of the amplitude into several factors. option 300 also reports relative intensity noise (rin) and q-factor. 86100d-400 pll and jitter spectrum option 400 quickly characterizes key parameters of phase-locked loops and provides the jitter spectrum of your signal including spread spectrum clocks. control of the jitter source and receiver is integrated to ensure fast results. 86100d-401 advanced eye analysis for device testing with long patterns and to obtain ber-contour mask testing, option 401 integrates with the classic or flexdca interfaces to decompose the jitter and amplitude interference measurements into the key parameters. when using the embedded capability within flexdca or the included automation application, you may characterize jitter on simultaneous multiple lanes and obtain concise and visual results. 86100d-9fp pam-n analysis software accurately and quickly analyze pulse amplitude modulation (pam) signals as described in ieee 802.3bj clause 94 and developing standards such as oif-cei-56g and ieee 400g. 26 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet software applications (continued) 86100d-sim infniisim-dca at higher data rates, the effect of measurement fxtures and channels is prominent and can be accounted for through the de-embedding capabilities within option sim. you may also view measurements on live and simulated signals, allowing you to compare design intent to actual performance. n1012a oif cei compliance and debug application the n1012a application lets you fully characterize the ~120 transmitter test parameters (including 28g-vsr), reducing your test time from hours to minutes. included are return loss tests and several utilities to improve your test productivity. debug mode enables you to characterize your devices well beyond the parameters prescribed in the implementation agreements. n1014a sff-8431 compliance and debug application the n1014a application lets you fully characterize ~70 test parameters including all transmitter tests for host, module and host copper and all test signals for receiver testing. return loss tests and utilities are also included. n1019a user-defned application you may create your own test application or suite of tests using the dca-x and other instruments. quickly and intuitively create groups of tests, test descriptions, user prompts and test limits. use concise html reports to share your multiple test results with your users. n1081-4a ieee802.3 ethernet applications the extensive requirements for ieee802.3-2012, 802.3bj and 802.3bm are covered in these four applications, which comprise > 400 tests. characterize your device for one, four or ten lanes, and analyze trends over time/temperature and between devices. 86100d-bfp automatic fixture removal (afr) when measuring physical layer devices with non-coaxial interfaces, test fxtures or probes are often used to connect the device under test (dut) to the measurement equipment. for accurate measurements of the dut, the fxtures or probes need to be characterized and their effects removed from the composite measurement of the dut plus test fxture or probe combination. this option adds the automatic fixture removal (afr) capability from keysights powerful n1930b physical layer test system (plts) software to help you characterize a fxture or probe with non-coaxial interfaces. fixtures and probes to be characterized can be single-ended or differential. 27 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet measurements the 86100d dca-x features two user interfaces for optimum ease-of-use. it includes the classic dca interface for complete backwards compatibility with earlier dca mainframes. it also includes the new flexdca interface that provides new measurements and powerful analysis capability in a fully customizable application. the following measurements are available from the tool bar, as well as the pull down menus. the available measurements depend on the dca-x operating mode. oscilloscope mode C time rise time, fall time, jitter rms, jitter p-p, period, frequency, + pulse width, C pulse wwidth, duty cycle, delta time, [tmax, tmin, tedgeremote commands only] C amplitude overshoot, average power, v amptd, v p-p, v rms, v top, v base, v max, v min, v avg, oma (optical modulation amplitude) eye/mask mode C nrz eye measurements extinction ratio, jitter rms, jitter p-p, average power, crossing percentage, rise time, fall time, one level, zero level, eye height, eye width, signal to noise, duty cycle distortion, bit rate, eye amplitude C rz eye measurements extinction ratio, jitter rms, jitter p-p, average power, rise time, fall time, one level, zero level, eye height, eye amplitude, opening factor, eye width, pulse width, signal to noise, duty cycle, bit rate, contrast ratio mask test C open mask, start mask test, exit mask test, flter, mask test margins, mask margin to a hit ratio, mask test scaling, create nrz mask option 200 enhanced jitter analysis software C measurements total jitter (tj), random jitter (rj), deterministic jitter (dj), periodic jitter (pj), data dependent jitter (ddj), duty cycle distortion (dcd), intersymbol interference (isi), sub-rate jitter (srj), asynchronous periodic jitter frequencies, subrate jitter components C flexdca adds the following measurements: data dependent pulse width shrinkage (ddpws), uncorrelated jitter (uj), j2, j9 C data displays tj histogram, rj/pj histogram, ddj histogram, composite histogram, ddj versus bit position, bathtub curve (log or q scale) option 201 advanced waveform analysis C measurements deep memory pattern waveform, user-defned measurements through matlab interface C data displays equalized waveform option 202 enhanced impedence and s-parameters C markers and delta markers on live frequency domain responses such as s-parameter magnitude, phase and group delay option 300 amplitude analysis/rin/q-factor (requires option 200) C measurements total interference (ti), deterministic interference (dual-dirac model, di), random noise (rn), periodic interference (pi), and inter-symbol interference (isi), rin (dbm or db/hz), q-factor C data displays ti histogram, rn/pi histogram, isi histogram option 400 pll and jitter spectrum measurement software C jitter spectrum/phase noise measurements integrated jitter: total jitter (tj), random jitter (rj), deterministic jitter (dj); dj amplitude/frequency, jitter spectrum graph, jitter versus time graph, frequency versus time graph, jitter histogram, post processed jitter measurements, phase noise graph dbc/hz versus frequency C phase locked loop (pll) measurements pll bandwidth, pll peaking, data rate, jitter transfer function (jtf) graph, observed jitter transfer (ojtf) graph, jtf model. option 401 advanced eye analysis C * jitter analysis on long patterns flexdca version: total jitter (tj), deterministic jitter (dj), random jitter (rj), j2, j5, j9. jitter can be measured on long patterns such as prbs23, prbs31, live traffc. microsoft excel version: all of the above, plus ber contour mask testing. 28 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet option 500 productivity package including tdec option 500 enables rapid eye acquisition and tdec (transmitter dispersion and eye closure) measurements. rapid eye achieves two signifcant benefts. first, unlike conventional sampling and data display, when an eye mask test is performed, every acquired sample will be compared to the mask, as the central eye is composed of all acquired samples. effective throughput is improved at least 60%. second, incomplete eye diagram displays that can occur when triggering at sub-rates are eliminated. tdec is a complex eye diagram measurement required for new high data rate standards deployed over multimode fber. it is easily and quickly achieved with the automated tdec measurement. (ieee 802.3bm and t11 fc-pi-6p require a specifc tdec channel bandwidth, achieved with 86105d/86115d-option 168.) option 401 advanced eye analysis C jitter measurements total jitter (tj), random jitter (rj), deterministic jitter (dj), j2 jitter (j2), j5 jitter (j5), j9 jitter (j9) C amplitude measurements total interference (ti), random noise (rn), deterministic interference (di), eye opening C mask test pass/fail status, ber limit option sim infniisim-dca 2-port de-embedding and embedding; 4-port de-embedding and embedding; add simulated random jitter and noise option 9fp pam-n analysis software C electrical and optical signals C eye width, eye height, eye skew C level amplitude, level noise, level skew C linearity measurements tdr/tdt mode (requires tdr module) some also usable within measurement regions: prior to average add: C time domain responses available in volts, percent refection and ohms (where applicable) C x-axis in time or distance C average C min C max C amplitude at time C excess capacitance C excess inductance C rise time C fall time C delta time measurements (continued) C time at max C time at min C time at amplitude C limit lines C time at edge additional capabilities standard functions C standard functions are available through pull down menus and soft keys, and some functions are also accessible through the front panel knobs. markers C two vertical and two horizontal (user-selectable) limit tests C acquisition limits C limit test run until conditions off, # of waveforms, # of samples C report action on completion save waveform to memory, save screen image C measurement limit test C specify number of failures to stop limit test C when to fail selected measurement inside limits, outside limits, always fail, never fail C report action on failure save waveform to memory, save screen image, save summary C mask limit test C specify number of failed mask test samples C report action on failure save waveform to memory, save screen image, save summary limit lines C with the limit line editor, you can modify an existing limit line or create a new limit line from a current waveform or manual data entry. C limit lines are displayed boundaries used for pass/fail testing in oscilloscope and tdr/tdt instrument modes, and they are similar to masks in eye/mask mode. C any data point that occurs above an upper limit line or below a lower limit line causes a failed condition. a failed portion of a waveform that is beyond the limit line boundary is displayed in red. waveform autoscaling autoscaling provides quick horizontal and vertical scaling of both pulse and eye-diagram (rz and nrz) waveforms. gated triggering trigger gating port allows easy external control of data acquisition for circulating loop or burst-data experiments. use ttl-compatible signals to control when the instrument does and does not acquire data. 29 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet confgure measurements C thresholds C 10%, 50%, 90% or 20%, 50%, 80% or custom C eye boundaries C defne boundaries for eye measurements C defne boundaries for alignment C format units for C duty cycle distortion time or percentage C extinction/contrast ratio ratio, decibel or percentage C eye height amplitude or decibel (db) C eye width time or ratio C average power watts or decibels (dbm) C top base defnition automatic or custom C time defnition C first edge number, edge direction, threshold C second edge number, edge direction, threshold C jitter mode C units (time or unit interval, watts, volts, or unit amplitude) C signal type (data or clock) C measure based on edges (all, rising only, falling only) C graph layout (single, split, quad) quick measure confguration when using the classic dca interface, quick measure measurements are initiated by pressing the 30 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet easier calibrations calibrating your instrument has been simplifed by placing all the performance level indicators and calibration procedures in a single high-level location. this provides greater confdence in the measurements made and saves time in maintaining equipment. stimulus response testing using the keysight technologies, inc. n490x, m8000 series berts error performance analysis represents an essential part of digital transmission test products. together, the keysight 86100d and bert products create a powerful test solution. if stimulus only is needed, the 81133a and 81134a pattern generators work seamlessly with the 86100d. transitioning from the keysight 83480a and 86100a/b/c to the 86100d while the 86100d has powerful new functionality that its predecessors dont have, it has been designed to maintain compatibility with the keysight 86100a, 86100b, 86100c and keysight 83480a digital communications analyzers and keysight 54750a wide-bandwidth oscilloscope. all modules used in the keysight 86100a/b/c, 83480a and 54750a can also be used in the 86100d. since the 86100d includes the classic dca interface, the remote programming command set for the 86100d designed for the 86100a/b/c will work directly. some code modifcations are required when transitioning from the 83480a and 54750a, but the command set is designed to minimize the level of effort required. ivi-com capability interchangeable virtual instruments (ivi) is a group of new instrument device software specifcations created by the ivi foundation to simplify interchangeability, increase application performance, and reduce the cost of test program development and maintenance through design code reuse. the 86100d ivi-com drivers are available for download from the keysight website. vxii.2 and vxii.3 instrument control the 86100d dca-x provides lan based instrument control. measurements (continued) 31 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet 86100d infniium dca-x mainframe 86100d hardware options 86100d-str standard trigger 86100d-etr enhanced trigger 86100du-etr enhanced trigger upgrade kit 86100d-ptb precision timebase integrated in the mainframe 86100du-ptb upgrade mainframe with integrated precision timebase 86100d-gpi gpib card interface installed (default) 86100d-gpn no gpib card interface 86100d-090 removable hard drive 86100d-092 internal hard drive (default) 86100d software options 86100d-xxx are permanent fxed-node licenses installed by the factory 86100du-xxx are permanent fxed-node licenses installed by the customer (software upgrades) 86100dt-xxx are permanent transportable licenses installed by the customer the -xxx option code provides the same functionality independent of the prefx (i.e., 86100d or 86100du or 86100dt) 86100d-bfp automatic fxture removal 86100d-061 matlab - basic oscilloscope package 86100d-062 matlab - standard oscilloscope package 86100d-200 enhanced jitter analysis software 86100d-201 advanced waveform analysis software 86100d-202 enhanced impedance and s-parameter software 86100d-300 amplitude analysis/rin/q-factor 86100du-400 pll and jitter spectrum software 1 86100d-401 advanced eye analysis software 1 86100d-sim infniisim-dca software 86100d-500 productivity package software 86100d-9fp pam-n analysis software, fxed perpetual license n1012a oif cei compliance and debug application n1014a sff-8431 compliance and debug application n1019a user-defned application n1081a ieee 802.3 kr/kr4 application n1082a ieee 802.3bj xlaui, caui-10 and nppi; ieee 802.3bm caui-4 (option -4tp) n1083a ieee 802.3 40gbase-cr4 and 100gbase-cr10 n1084a ieee802.3 kr4/cr4 application misc options 86100d-afp module slot fller panel 86100d-ax4 rack mount fange kit 86100d-axe rack mount fange kit with handles 86100d-uk6 commercial cal certifcate with test data 86100du-wn7 upgrade to windows 7 operating system note: C option bfp requires option 202. C for complete pam4 analysis capability, option 9fp requires options 200/201/300/401. C options 200, 201, and sim require option etr (enhanced trigger). C option 300 requires options 200 and etr. C option 400 requires microsoft offce excel 2007/2010. optical/electrical modules 86105c 9 ghz optical channel; single-mode and multimode, amplifed (750 to 1650 nm) 20 ghz electrical channel 86105c-100 155 mb/s through 8.5 gb/s (choose 4 flter rates from options 86105c-110 through 86105c-195) 86105c-110 155 mb/s 86105c-120 622 mb/s (also covers 614 mb/s) 86105c-130 1.063 gb/s 86105c-140 1.244/1.250 gb/s (also covers 1.229 mb/s) 1. fixed node customer installed or transportable customer installed (86100du or 86100dt). not available as a factory-installed license. 2. this module is not compatible with the 86100a and 86100b dca mainframes. if you want to upgrade older dcas, contact keysight technologies to discuss current trade-in deals. 3. system impulse response correction calibration provides a unique calibration fle for the optical channel(s). the flexdca user interface uses this calibration fle to create ideal reference receiver responses for more accurate and consistent transceiver compliance testing. irc also allows reference receivers to be defned at any data rate within 50% of the hardware response. this allows optical receivers to signifcantly extend their operating range. 4. a 15 gb/s flter is provided with option 281 and 282 that closely approximates the response required for 16x fibre channel compliance testing. contact keysight for a special option that verifes compliance of the 86105d-281 and 86115d-282 to the 16x fibre channel reference receiver specifcation. ordering information optical/electrical modules (continued) 86105c-150 2.125 gb/s 86105c-160 2.488/2.500 gb/s (also covers 2.458 gb/s) 86105c-170 2.666 gb/s 86105c-180 3.125 gb/s (also covers 3.072 gb/s) 86105c-190 4.250 gb/s 86105c-193 5.0 gb/s 86105c-195 6.250 gb/s (also covers 6.144 gb/s) 86105c-200 8.5, 9.953, 10.3125, 10.519, 10.664, 10.709, 11.096, 11.317 gb/s 86105C-300 combination of rates available in 86105c-100 and 86105c-200 86105d 2 20 ghz optical channel; single-mode and multimode, (750 to 1650 nm); flters for 8.5, 9.953, 10.3125, 10.519, 10.664, 10.709, 11.096, 11.317, 14.025 gb/s; 35 ghz electrical channel 86105d-100 identical capability as 86105d, 14.025 gb/s flter not included 86105d-200 identical capability as 86105d, only flter provided is 14.025 gb/s 86105d-irc 3 system impulse response correction calibration 86105d-281 34 ghz optical channel, flters for 15, 25.78 , 27.95, 28.05 gb/s (contact keysight for additional 14.025 gb/s flter) 4 . 50 ghz electrical channel 86115d 2 20 ghz multi-optical port plug-in module; single-mode and multimode (750 to 1650 nm); flters for 8.5, 9.953, 10.3125, 10.519, 10.664, 10.709, 11.096, 11.317, 14.025 gb/s 86115d-002 two optical channels with flters for all rates listed (8.5 to 14.025 gb/s) 86115d-102 identical capability as 86115d-002, 14.025 gb/s flters not included 86115d-142 identical capability as 86115d-002, only flters provided are 14.025 gb/s 86115d-282 two optical channels with flters for 15, 25.78, 27.95, 28.05 gb/s (contact keysight for 14.025 gb/s flter) 4 86115d-004 four optical ports with flters for all rates listed (8.5 to 14.025 gb/s) mulitplexed to two optical channels through 2 integral 1x2 optical switches 86115d-10 4 identical capability as 86115d-004, 14.025 gb/s flters not included 86115d-14 4 identical capability as 86115d-004, only flters provided are 14.025 gb/s 86115d-irc system impulse response correction calibration 86116c 2 40 to 65 ghz optical/80 ghz electrical sampling module, 1300 to 1620 nm 86116c-irc 3 system impulse response correction calibration this module is not compatible with the 86100a and 86100b dca mainframes. if you want to upgrade older dcas, contact keysight technologies to discuss current trade-in deals. all optical modules have fc/pc connectors installed on each optical port. other connector adapters available as options are: diamond hms-10, din, st and sc. 32 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet 86116c 1 40 to 65 ghz optical/80 ghz electrical sampling module, 1300 to 1620 nm select exactly one reference receiver option: 86116c-025 40 ghz optical/80 ghz electrical channels, 17.0/25.8/27.7 gb/s reference receiver 86116c-041 65 ghz optical/80 ghz electrical channels, 39.81/41.25/43.02 gb/s reference receiver dual/quad electrical channel modules 86112a dual 20 ghz electrical channels 86112a-hbw dual 30 ghz electrical channels 86117a dual 50 ghz electrical channels 86118a dual 70 ghz electrical remote sampling channels 86118a-h01 differential de-skew n1045a 2 2/4 port 60 ghz electrical remote head n1045a-02f 2 channel remote head, 1.85 mm, female n1045a-02m 2 channel remote head, 1.85 mm, male n1045a-04f 4 channel remote head, 1.85 mm, female n1045a-04m 4 channel remote head, 1.85 mm, male tdr/tdt modules 54754a 1, 5 differential tdr module with dual 18 ghz tdr/electrical channels n1055a 1, 2 35/50 ghz, 2/4 port, tdr/tdt remote head n1055a-fs1 fast sampling, mandatory option n1055a-32f 35 ghz, 2 channel remote head, 2.92 mm, female n1055a-32m 35 ghz, 2 channel remote head, 2.92 mm, male n1055a-34f 35 ghz, 4 channel remote head, 2.92 mm, female n1055a-34m 35 ghz, 4 channel remote head, 2.92 mm, male n1055a-52f 50 ghz, 2 channel remote head, 1.85 mm, female n1055a-52m 50 ghz, 2 channel remote head, 1.85 mm, male n1055a-54f 50 ghz, 4 channel remote head, 1.85 mm, female n1055a-54m 50 ghz, 4 channel remote head, 1.85 mm, male n1055a-fs1 fast sampling precision timebase module 86107a precision timebase reference module 86107a-010 2.5 and 10 ghz clock input capability 86107a-020 10 and 20 ghz clock input capability 86107a-040 10, 20 and 40 ghz clock input capability clock recovery modules 1 the following modules provide a recovered clock from the data signal for triggering at indicated data rates: 83496b 50 mb/s to 7.1 gb/s clock recovery module. this module is not compatible with the 86100a and 86100b dca mainframes. if you want to upgrade older dcas, contact keysight technologies and ask for current trade-in deals. 83496b-100 single-ended and differential electrical with integrated signal taps 83496b-101 single mode (1260 to 1360 nm and 1490 to 1600 nm) and multimode (830 to 860 nm and 1260 to 1360 nm) optical. integrated signal taps. single-ended or differential electrical inputs (no signal taps) 83496b-200 increase operating range to 50 mb/s to 14.2 gb/s 83496bu-200 data rate 0.05 to 14.2 gb/s upgrade 83496b-201 shift operating range to 7.1 to 14.2 gb/s 83496bu-201 shift operating range to 7.1 to 14.2 gb/s upgrade 83496b-300 add tunable loop bandwidth golden pll capability 83496bu-300 adjustable loop bandwidth upgrade 1. 86100d-etr is recommended when; a. more than 1 tdr module is connected to the same dut. b. using a dca module equipped with a rear-panel trigger circuit. examples include 54754a, 83496x, and 86108a/b modules. if operating these modules in an 86100d with option str, an external cable (such as p/n 5062-6690) must be connected from the modules front panel trigger/clock output to the 86100ds trigger input. 2. requires 86100d mainframe (not compatible with 86100a/b/c). 3. this module is not compatible with the 86100a and 86100b dca mainframes. if you want to upgrade older dcas, contact keysight technologies to discuss current trade-in deals. 4. supports both dca-x and dca-m platforms. for detailed n1076a/ n1077a specifcations, refer to the data sheet located at www.keysight.com/fnd/n1077a . standalone clock recovery instruments are controlled via a usb connection to an 86100d dca-x mainframe or a user-supplied pc running n1010a flexdca software. 5. included with each of these tdr modules is a tdr trigger cable, two 50 ? sma terminations and one sma short. ordering information (continued) external clock recovery solutions 4 n1076a electrical clock recovery n1076a-216 clock recovery range: 50 mbd to 16 gbd n1076a-232 clock recovery range: 50 mbd to 16 gbd n1076a-jsa jitter spectrum analysis n1077a optical/electrical clock recovery n1077a-216 clock recovery range: 50 mbd to 16 gbd n1077a-232 clock recovery range: 50 mbd to 16 gbd n1077a-sms internal sm and mm splitters n1077a-sx t no splitter (supplied by user) n1077a-jsa jitter spectrum analysis precision waveform analyzer module 1, 3 dual electrical channel module with integrated clock recovery and precision timebase. 86108a-100 dual 32 ghz electrical channels, integrated clock recovery (50 mb/s to 14.2 gb/s) with integrated precision timebase 86108a-001 two 3.5 mm phase trimmers for skew adjustment 86108a-002 two precision 3.5 mm 18 inch cables 86108a-400 auxiliary clock recovery input 86108b options 86108b-lbw dual 35 ghz electrical channels 86108b-hbw dual 50 ghz electrical channels 86108b-216 clock recovery 50 mb/s to 16 gb/s 86108b-232 clock recovery 50 mb/s to 32 gb/s 86108b-300 adjustable loop bandwidth/peaking 86108b-400 auxiliary clock recovery input 86108b-ptb integrated precision timebase 86108b-jsa jitter spectrum analysis and software clock recovery emulation 86108b-a23 two adapters, 2.4 mm (f) to 3.5 mm (f) 86108b-ca2 matched cable pair, 2.4 to 2.4 mm, 24 inch 86108b-ca3 matched cable pair, 3.5 to 3.5 mm, 18 inch 86108b-dc2 two dc blocks, 2.4 mm, 16 v, 50 khz to 50 ghz 86108b-dc3 two dc blocks, 3.5 mm, 16 v, 50 khz to 26.5 ghz 86108b-pt2 two 2.4 mm phase trimmers for ext. skew adjustment phase trimmers nominal impedance frequency range insertion loss (at f max) time delay connectors 86108b-pt3 two 3.5 mm phase trimmers for ext. skew adjustment phase trimmers nominal impedance frequency range insertion loss (at f max) time delay connectors 33 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet warranty options (for all products) r1280a customer return repair service r1282a customer return calibration service accessories n1000-40008 front cover 86101-60017 filler panel (1/4 of module bay) 0960-2929 usb keyboard (included with 86100d) 1150-7913 usb mouse (included with 86100d) 9300-1308 esd heel strap 9300-1367 esd wrist strap 9300-1484 esd desk mat 9300-0980 esd wrist strap ground cord optical connector adapters note: optical modules come standard with one fc/pc connector adapter 81000fi fc/pc connector interface 81000si din connector interface 81000hi e2000 connector interface 81000li lc connector interface 81000mi mu connector interface 81000vi st connector interface 81000ki sc connector interface n9355ck01 dc coupled limiter for overload and esd protection (3.5 mm only) rf/microwave accessories 1 11636b power divider, dc to 26.5 ghz, apc 3.5 mm n4910a 2.4 mm male-to-male matched coaxial cable pair, 61 cm n4871a 3.5 mm male-to-male matched coaxial cable pair, 91 cm 11636c power divider, dc to 50 ghz, 2.4 mm 11742a 45 mhz to 26.5 ghz dc blocking capacitor n9398g 1.85 mm male-to-female dc block 16 v 700 khz to 67 ghz n9398f 2.4 mm male-to-female dc block 16 v 50 khz to 50 ghz n9398c 3.5 mm male-to-female dc block 16 v 50 khz to 26.5 ghz 11742a-k01 50 ghz dc blocking capacitor 8493c-003 3.5 mm 3 db attenuator 8493c-006 3.5 mm 6 db attenuator 8493c-010 3.5 mm 10 db attenuator 8493c-020 3.5 mm 20 db attenuator 8490d-003 2.4 mm 3 db attenuator 8490d-006 2.4 mm 6 db attenuator 8490d-010 2.4 mm 10 db attenuator 8490d-020 2.4 mm 20 db attenuator 11900a 2.4 mm male to 2.4 mm male adapter/connector saver 11900b 2.4 mm female to 2.4 mm female adapter/connector saver 11900c 2.4 mm female to 2.4 mm male connector saver 11901a 2.4 mm male to 3.5 mm male adapter 11901b 2.4 mm (f) to 3.5 mm (f) adapter 11901c 2.4 mm (m) to 3.5 mm (f) adapter 11901d 2.4 mm (f) to 3.5 mm (m) adapter 5061-5311 3.5 mm (f-f) connector saver (e.g., for 86100c/d trigger input) 85130-60010 2.4 mm female to 3.5 mm male nmd bulkhead adapter 1250-1158 sma (f-f) adapter 83059a 3.5 mm male to 3.5 mm male adapter/connector saver 83059b 3.5 mm female to 3.5 mm female adapter/connector saver 83059c 3.5 mm female to 3.5 mm male connector saver 909d-011 3.5 mm female 50 ? load 909d-301 3.5 mm male 50 ? load 85138a 2.4 mm male 50 ? load 1. 2.4 mm connectors are mechanically compatible with 1.85 mm. 2.92 mm connectors are mechanically compatible with 3.5 mm and sma connectors. ordering information (continued) rf/microwave accessories 1 (continued) 85138b 2.4 mm female 50 ? load 85140a 2.4 mm male short 85140b 2.4 mm female short tdr/tdt accessories see n1055a data sheet infniimax i active probes (1.5 to 7 ghz) note: the n1022b probe adapter is required to use these probes with the 86100 dca infniimax i probe amplifers note: order one or more infniimax i probe head or connectivity kit for each amplifer 1130a 1.5 ghz probe amp 1131a 3.5 ghz probe amp 1132a 5 ghz probe amp 1134a 7 ghz probe amp infniimax i probe heads e2675a infniimax differential browser probe head and accessories. includes 20 replaceable tips and ergonomic handle. order e2658a for replacement accessories. e2676a infniimax single-ended browser probe head and accessories. includes two ground collar assemblies, 10 replaceable tips, a ground lead socket and ergonomic browser handle. order e2663a for replacement accessories. e2677a infniimax differential solder-in probe head and accessories. includes 20 full bandwidth and 10 medium bandwidth damping resistors. order e2670a for replacement accessories. e2678a infniimax single-ended/differential socketed probe head and accessories. includes 48 full bandwidth damping resistors, six damped wire accessories, four square pin sockets and socket heatshrink. order e2671a for replacement accessories. e2679a infniimax single-ended solder-in probe head and accessories. includes 16 full bandwidth and eight medium bandwidth damping resistors and 24 zero ohm ground resistors. order e2672a for replacement accessories. 34 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet infniimax i connectivity kits (popular collections of the above probe heads) e2669a infniimax connectivity kit for differential measurements e2668a infniimax connectivity kit for single-ended measurements infniimax ii active probes (10 to 13 ghz) note: the n1022b probe adapter is required to use these probes with the 86100 dca infniimax ii probe amplifers note: order 1 or more infniimax ii probe heads for each amplifer. infniimax i probe heads and connectivity kits can also be used but will have limited bandwidth 1168a 10 ghz probe amp 1169a 13 ghz probe amp infniimax ii probe heads n5380a infniimax ii 12 ghz differential sma adapter n5381a infniimax ii 12 ghz solder-in probe head n5382a infniimax ii 12 ghz differential browser infniimax iii active probes (16 to 30 ghz) note: the n5477a probe adapter is required to use these probes with the 86100 dca infniimax iii probe amplifers n2800a 16 ghz probe amp n2801a 20 ghz probe amp n2802a 25 ghz probe amp n2803a 30 ghz probe amp infniimax iii probe heads n5439a zif probe head n5440a 450 ? zif tip n5447a 200 ? zif tip n5444a 2.92 mm/3.5 mm/sma n5448a 2.92 mm extension cables n5441a solder-in probe head n5445a browser probe head www.keysight.com/fnd/infniimax3 ordering information (continued) probe adapters n5477a sampling scope adapter. adapts the infniimax iii system probes to the 86100 infniium dca n1022b adapts 113x/115x/116x active probes to 86100 infniium dca the n1022a/b and n5477a adapters are powered by connecting it to the built-in probe power connector available on some dca modules or to an external probe power supply. on modules that do not have a built-in probe power connector, use an 1143a external power supply. it is recommended to order option 001 on the 1143a, which provides a 5-foot power extension cable (01143-61602). the 1143a power supply can power two probes. the n1022a/b and n5477a adapters are compatible with male 3.5 mm nmd bulkhead inputs. insert an 85130-60010 2.4 mm female nmd to 3.5 mm male nmd adapter in order to use them for 2.4 mm nmd bulkhead inputs. connectivity solutions for a wide range of test adapters to connect to one or more lanes for sfp+, qsfp+, fbre channel, pcie and many others, please see adapters information from wilder technologies at: http://www.wilder-tech.com/ call keysight for connectivity and probing solutions not listed above. firmware and software firmware and software upgrades are available through the web or your local sales offce. www.keysight.com/fnd/dcax n1010a flexdca remote access software flexdca pro runs on the 86100d as well as on a pc or laptop. software licenses allow connectivity to an 86100c or d mainframe, advanced analysis or productivity packages, and more. http://www.keysight.com/fnd/fexdca_download flexdca express is the same as flexdca pro except that it does not included any functionality requiring a license. it is available free of charge from http://www.keysight.com/fnd/fexdca_express 86100d dca-x brochure for more information on the features and benefts of the 86100d dca-x and dca modules, download the 86100d dca-x brochure. go to: www.keysight.com and search on 5989-5822en. 35 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet keysight oscilloscopes multiple form factors from 20 mhz to > 90 ghz | industry leading specs | powerful applications 36 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet www.axiestandard.org advancedtca ? extensions for instrumentation and test (axie) is an open standard that extends the advancedtca for general purpose and semiconductor test. the business that became keysight was a founding member of the axie consortium. atca ? , advancedtca ? , and the atca logo are registered us trademarks of the pci industrial computer manufacturers group. www.lxistandard.org lan extensions for instruments puts the power of ethernet and the web inside your test systems. the business that became keysight was a founding member of the lxi consortium. www.pxisa.org pci extensions for instrumentation (pxi) modular instrumentation delivers a rugged, pc-based high-performance measurement and automation system. 37 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet this information is subject to change without notice. ? keysight technologies, 2010 - 2016 published in usa, august 4, 2016 5990-5824en www.keysight.com for more information on keysight technologies products, applications or services, please contact your local keysight office. the complete list is available at: www.keysight.com/find/contactus americas canada (877) 894 4414 brazil 55 11 3351 7010 mexico 001 800 254 2440 united states (800) 829 4444 asia pacifc australia 1 800 629 485 china 800 810 0189 hong kong 800 938 693 india 1 800 11 2626 japan 0120 (421) 345 korea 080 769 0800 malaysia 1 800 888 848 singapore 1 800 375 8100 taiwan 0800 047 866 other ap countries (65) 6375 8100 europe & middle east austria 0800 001122 belgium 0800 58580 finland 0800 523252 france 0805 980333 germany 0800 6270999 ireland 1800 832700 israel 1 809 343051 italy 800 599100 luxembourg +32 800 58580 netherlands 0800 0233200 russia 8800 5009286 spain 800 000154 sweden 0200 882255 switzerland 0800 805353 opt. 1 (de) opt. 2 (fr) opt. 3 (it) united kingdom 0800 0260637 for other unlisted countries: www.keysight.com/find/contactus (bp-06-08-16) dekra certified iso9001 quality management system www.keysight.com/go/quality keysight technologies, inc. dekra certified iso 9001:2015 quality management system mykeysight www.keysight.com/find/mykeysight a personalized view into the information most relevant to you. keysight infoline www.keysight.com/find/infoline keysights insight to best in class information management. free access to your keysight equipment company reports and e-library. keysight services keysight services www.keysight.com/find/service our deep offering in design, test, and measurement services deploys an industry-leading array of people, processes, and tools. the result? we help you implement new technologies and engineer improved processes that lower costs. three-year warranty www.keysight.com/find/threeyearwarranty keysights committed to superior product quality and lower total cost of ownership. keysight is the only test and measurement company with three-year warranty standard on all instruments, worldwide. and, we provide a one-year warranty on many accessories, calibration devices, systems and custom products. keysight assurance plans www.keysight.com/find/assuranceplans up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. keysight channel partners www.keysight.com/find/channelpartners get the best of both worlds: keysights measurement expertise and product breadth, combined with channel partner convenience. www.keysight.com/find/86100d evolving our unique combination of hardware, software, support, and people can help you reach your next breakthrough. we are unlocking the future of technology. from hewlett-packard to agilent to keysight |
Price & Availability of 86105C-300
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |